XMT*608 series intelligent temperature controller,is double row 3-LED display, respectively display
temperature measurement value (PV) and temperature set value (SV) under normal mode;When it is
time temperature control, respectively display temperature measurement value (PV) and running time
count down (SV),and also provide kinds of time control method selection;The controller can input kinds
of signal which are used interchangeably,it adopt ON/OFF(P=0),PID control,allowing an easy parameter setting and
convenient inputting,is widely used over temperature automatic control systems of machinery,chemical,ceramics,
light industrial,metallurgy,petrifaction and heat treatment and so on.
Main technical Indexes
1. Measurement deviation: ± 0.5FS± 1, additional cold end compensating deviation± 1
2. Input(can be selected): CU50(-50~150)\PT100(-80~600)\K(-30~999)\E(-30~700)\J(-30~900)\T(199~400)
3. Relay output (passive) contact capacity: AC250V 5A(resistance load) Period 2~120s can be adjusted.
4. Time range: 0~999s or 0~999m(can be selected)
5. Driving solid relay signal output: Driving electric current >15mA no-load voltage>12V, period is about 2S.
6. Work power: AC85V~242V, 50Hz Power consumption<3W
7. Work environment: 0~50, relative humidity≤ 85%, without corrode and strong electric radiation.
8. Dimensions48× 96× 75(mm) Installation hole 44× 92(mm)
Time function:
1:start timing when it reaches the temperature,and the built-in buzzer will give an alarm output after reaching the time, the controller keep on heating;
2:start timing when it reaches the temperature,and the built-in buzzer will give an alarm output after reaching the time, the controller stop heating;
3:regular temperature control(no alarm)+time relay function:start timing when the power is on, alarm relay attracting after reaching the time.
Model Sense
XMT(-) - 6 (-) 8 (-)
1 2 3 4 5
1:External dismensions
Empty: 160×80×90 Installation hole 152×76
A: 96×96×90 Installation hole 92×92
D: 72×72×90 Installation hole 68×68
E: 48×96×90 Installation hole 44×92
F: 96×48×90 Installation hole 92×44
G: 48×48×100 Installation hole 44×44
S: 80×160×90 Installation hole 76×152
B:60×120×90 Installation hole 56×116
2: operation display method:'6' 3-key gentel push-switch setting,double row digital display,have PID adjustment
3: an additional alarm
Blank or '0':indicates no alarm;
'1':upper limit touch alarm;
'3':upper and lower limit touch alarm
4:Input signal classification: '8'input signal can interchange free
5:suffix None:relay output
G:solid state relay output
D:High power relay output
T: Time control
Packaging Details
Audited Supplier 
){kind=link}