D52-2042 Din-rail AC voltage and current meter can display AC voltage and current at the same time. If the measuring current is lower than 99.9A, you can get the AC cur rent only making the wire across the hole which in the right side of the meter.
Technical Parameters
1. Accuracy: 1%
2. Display mode: 0.5 inch LED digital tube
3. Range: AC voltage: 80 - 300V, AC Current: 0.1 - 99.9A
4. Measuring Speed: twice per second
5. Shape Size: 54*80* 64 mm
6. Installation: Din-rail
Meter Panel and Operation
1. As shown on the picture, connect the measured voltage to the terminal 1 and 2on the left bottom
2. User can get the loop wires through the hole on the bottom or the top hole according to the circumstances arbitrarily, which will not affect the measure results.
Note:
1. This meter can be only powered on with a pure AC meter 50Hz / 60Hz power supply.
2. Forbidden to use this instrument to measure square wave, inverter output, modify sine wave, otherwise incorrect measurement will be damage the meter.
3. The contents of this manual may subject to change without prior notice.
Audited Supplier 
){kind=link}