Cj Xmtd-Jk408 4 Channlel Intelligent Pid Temperature Controller

Product Description

Summary

XMT*JK408 temperature controller can connect four sensors synchronously and conveniently, diminish the

instrument's volume. It has a separate auto-tune mode and PID parameter function with more precision and
more reliability in whole machine control.

Primary technical standard:
1.Input signal: CU50(-50.0~150.0)\PT100(-19.9~600.0)\K(0~1300)\

E(0~700.0)\J(0~900.0)

2.Accuracy: ± 0.5%F. S± 1byte

3.Output method: Relay AC220V 3A(resistance load)

4.control mode: Difference control-on/off and PID control

5.Input power: AC85~242V 50/60Hz

6.Environment Temperature: 0 to 50, Humidity: ≤ 85%RH

7.Overall size and installation hole (mm):
XMTA: 72× 72× 110; 68× 68

Panel board instruction(consult)




Connection scheme(consult)




Code setting mode

Series		Code		Name		Setting range		Manual	Remarks
First Menu	0	LOCK		Code lock		0~50		LOCK=18,all the parameter can be revised	18
	1	Sn		Input type		0~4		CU50,Pt100,K,E,J	K
	2*	ALP		Alarm define		0~6		0:no alarm,1:upper limit alarm,2:low limit alarm,3:upper warp alarm,4:low warp alarm, 5:between besides alarm, 6:between inside alarm	1
	3	t		Output cycle		0~120 S		relay control action cycle setting	10 S
	4	dp		display accuracy		0~1		1: have radix point, 0: have not radix point	0
	5	P-SH		Upper limit		P-SL~full range		this parameter resreict enactment value's upper	according request
	6	P-SL		lower limit		Range jumping-off ~P-SH		this parameter resreict enactment value's low	according request
	7	OPB		Assistant output method		0~2		0:no  Assistant output; 1:RS485 communication 2:Mini pinter	0
	8	Add		address		1~64 (1~9999)		Meter's NO (in minitype as print times)	1
	9	bt		baud rate		--		0:1200; 1:2400; 3:4800; 4:9600	9600 9600
Second Menu	10		SP+N(1~4)		N channels control setting		Range by P-SL,P-SH decide	Control value setting	default
	11		AL+N		Alarm  value setting		Range by P-SL,P-SH decide	Output mode decide by 'AL-P'	default
	12		SC+N		Sensor error amendment		±20.0	The sensor have deviation can use item to revisal	0
	13		P+N		Proportion modulus		0~100	When the P increase, the proportion function decrease. When P=0,the meter is ON/OFF control	8
	14		I+N		Integral time		0~3000	Set integral time so as to unchain residual. Deflection caused by proportion control. To increase it, the static difference will be reduced, but when it is too high ,the static difference will drift instability.	240
	15		d+N		differential time		0~200S	Set the differential time,so as to avoid. The output's fluctuation,Improve the control's stability.	30
	16		Hy+N		Main control by drop in level		0.1~50.0	-	1.0
	17*		At+N		Setting itself		0~1	0:close setting itself function   1:open setting inself function	0