K, E, PT100, CU50
Sensor head will be placed on the need measuring temperature point, direct measure the point Temperature, secondary use with a variety of temperature meter.
Sensor is installed in the workpiece position as much as possible, to avoid the installation of tnext to the door or near the heating object. The insertion depth accord with actual need. The installation of sensor maintain a position as vertical as possible, but in the case of flow measurement must install reverse tilt. If you need fix sensor, the container wall can be opened a fix larger hole than the sensors installation thread diameter, install the sensor fixed on the container with the nut attached. When the measured object is non- gas or liquid, the temperature sensor make some close contact with the measured object, in order to improve response speed and reduce the transmission error.
If the thermocouple output wire need lengthen, you should use the relative thermocouple ompensation wire with the same polarity, and then connect with the secondary meter. Sensor wire or compensation wire should directly connect to the secondary meter connecting terminal, to avoid the use of ordinary wire, otherwise the error will be. Bending connection as little as possible to extend the use time, frequent bending sensors must be designed for.
| Company Name |
Yuyao Gongyi Meter Co.,Ltd. |
| Contact Name |
Cheryl |
| TEL |
008657462816433 |
| FAX |
008657462814210 |
| ADD |
No.9 Changqing Road,Yuyao City,Zhejiang Province |
Audited Supplier 
){kind=link}