Temperature controller
Conrtol method: ON/OFF; PID
Input signal: CU50; PT; K; E; J; T
Power supply: 85-242V; 50/60HZ
I. Summarize
XMTL-318 intelligent temperature controller, is single row 4-LED display. The controller can input kinds of signals which are used interchangeably, three-button operation, adopts ON/OFF control and PID control. It can select Fahrenheit and degree centigrade temperature display. It allows an easy parameter setting and convenient inputting, is used widely temperature automatic control systems of machinery, chemical, ceramics, light industrial, metallurgy, petrifaction and heat treatment and so on.
II. Main Technical Indexs
1, Measurement deviation: ± 0.5%FS± 1B, Cold end compensating deviation≤ ± 2C
2, Input(can be selected): CU50, PT100, K, E, J, T, S
3, Relay output contact capacity: AC220V 5A(resistance load)
Period 2~120s can be adjusted.
4, Power: AC85V~242V, 50~60HZ
5, Installation type: 35mm DIN guide rail installation
6, Work environment: Temperature 0~50.0C, relative humidity≤ 85%RH, without corrode and strong electric radiation.
Common fault handling
| Fault symptom |
Analysis of causes |
Disposal measurement |
| Abnormal power |
1.Poor contact of power cord
2.Power switch without lose |
Check the power |
| Signal display do not correlate with the facts.(display'HH') |
1.Sensor model mismatch
2.Wrong signal connection |
1.Check sensor model and meter interior input parameter
2.Check signal wire |
| Abnormal output control |
1.Wrong connecting output wire |
1.Check output connection |
Audited Supplier 
){kind=link}